Estwing Hammers
Estwing Tools for Professional Construction and Hand Tool Work
Estwing has produced hand tools in Rockford, Illinois, since the 1920s, and its manufacturing process has remained unchanged: a solid hunk of American steel shaped and tempered. That's what makes an Estwing tool worth its cost. Our collection covers the full spectrum of Estwing tools, designed to handle the toughest work on the job site.
Estwing Hammers, Hatchets, Axes, Pry Bars and Pullers
The Estwing hammer lineup covers the jobs you’ll actually run into. The Rip Claw Framing Hammer is designed for framers who need a hammer that has bite on every strike and don't want it to slide off a nail head. The 16oz and 20oz nail hammers offer a more controlled swing without tiring after a day's work.
The 2lb and 3lb Masonry Hammer Series hammers and the mash hammer with its 16” handle are called for when it comes to demolition. There are other tools beyond those used by roofers and tinners as well: the T3-18 Tinner's Hammer is for sheet metal work, and the 14oz welding and chipping hammer removes slag without chewing up your hand. The nail puller, molding puller, and the handy bars in 15” and 21” lengths cover the jobs from rough framing to trim work.
One-Piece Steel Construction and Solid Grip
Most people don't realize that cheaper hammers that don't live up to expectations have a design flaw: a two-piece hammer (head on a separate handle). Estwing hand tools avoid this issue altogether. The head and shaft are made of one piece of steel, no joint to loosen, no wood handle cracking, and no head flying off mid-swing. A true safety benefit on the busy jobsite.
Grips are as important as the steel. Depending on the tool, Estwing wraps its models in a shock-reduction grip or a true leather grip. The vibration-absorbing shock grip reduces hand fatigue by absorbing vibration on repeated blows during a long framing day. After 20 years of use, the leather grip is still with the tradesman, as it becomes comfortable to hold over time and provides a “locked-in” feel despite sweat or sawdust.
How to Pick the Right Estwing Tool for the Job
Weight is the first decision. The 20oz finisher hammer is good for finishing work and general carpentry. The 28oz framing hammer provides the heavy pounding for repetitive nailing without driving your arms to work out.
Handle style is all about feel and use. The shock grip is more likely to hold on in wet, cold conditions and stays grippy even when you're wearing gloves. If you are using a bar or drilling hammer to demolish or do masonry work, make sure you use a hammer of the same weight as the material you're breaking through.
To ensure that any of these tools continue to function for years, wipe the steel down after each use, store them in a dry location, and check leather grips periodically for cracks. That's it. With no complicated maintenance routine required, these tools show up on job after job for decades.
Estwing Tools, All Stocked at Tool Academy
For over 35 years, Tool Academy has provided contractors and tradespeople around the world with professional hand tools, and Estwing has been one of our favorites because we know this one will last for years. Browse our wide collection of Estwing hand tools, and if you need any assistance in choosing one, don’t hesitate to contact us.
